1. forum.manjaro.org

    inxi -N shows Network: Device-1: Intel Ethernet I219-V driver: e1000e Device-2: Intel Wireless 8265 / 8275 driver: iwlwifi Device-3: Realtek RTL8151 Adapteon Business Mobile Networks BV type: USB driver: usb-storage Device-3 is the Cable Matters ethernet adapter. ... It is picked up by the RTL Linux Kernel driver (though sometimes it ...
  2. wget/realtek-r8152-linux ... - For Fedora, you may have to run the following command after installing the driver. # dracut -f - For Ubuntu, you may have to run the following command after installing the driver. # sudo depmod -a # sudo update-initramfs -u - Example of setting speed 2.5G before kernel v4.10 # ethtool -s eth0 autoneg on advertise ...
  3. ubuntuforums.org

    I thought just about every pci card was supported by Linux but mabye RTL8151 is one of the few that doesn't. If this is the case I guess I should try to find a Linux driver or Windows driver and try using ndiswrapper. But I already used ndiswrapper on my usb card and got it installed but when I type: ndiswrapper -l, it says the driver is there ...
  4. askubuntu.com

    Do I need to install extra drivers? I've tested both devices with a Dell Latitude 7275 and Windows 10 and they're working fine. ... make sure you have current kernel headers installed sudo apt install linux-headers-$(uname -r) 4) compile the driver cd r8152_2.12.0 && make. 5) install the compiled driver sudo make install. Share.
  5. ubuntuforums.org

    I'm running Ubuntu Server 20.04.1 on an Intel NUC 10i5. I've found that the ethernet port on the NUC is very iffy - just barely touching/nudging the ethernet cable makes me lose connection. So I bought a USB 3.0-Ethernet adapter. (I could RMA, but I don't want to spend the time doing it right now). lsusb: Bus 002 Device 002: ID 0bda:8153 Realtek Semiconductor Corp. RTL8153 Gigabit Ethernet ...
  6. linuxquestions.org

    Get a virtual cloud desktop with the Linux distro that you want in less than five minutes with Shells! With over 10 pre-installed distros to choose from, the worry-free installation life is here! Whether you are a digital nomad or just looking for flexibility, Shells can put your Linux machine on the device that you want to use.
  7. bbs.archlinux.org

    # dmidecode | grep 'System Info' -A2 System Information Manufacturer: Dell Inc. Product Name: Latitude 3350 # lspci | grep -i net 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15) 04:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 32) # uname -r 4.7.6-1-ARCH
  8. forum.manjaro.org

    Followup to this post: [SOLVED] [RTL8151] Ethernet not working via multiport adapter I'm trying to get the Sabrent USB 3 to Ethernet 2.5Gbps adapter working on my Pi. I successfully mode-switched the device as described in the above thread. (By default, it's in USB storage mode so that the user can install the Windows driver off the tiny flash memory inside). However, the AUR package it ...
  9. - If you want to support S5 WOL, you have to find EXTRA_CFLAGS += -DRTL8152_S5_WOL in the Makefile. Then, remove the first character '#", if it exists. - For Fedora, you may have to run the following command after installing the driver. # dracut -f - For Ubuntu, you may have to run the following command after installing the driver.
  10. Can’t find what you’re looking for?

    Help us improve DuckDuckGo searches with your feedback

Custom date rangeX